RDL TX-PSD1 Paging Sound Detector Switching Functions Controlled by Speaker Level Source - Power Supply Included

RDL TX-PSD1 Paging Sound Detector Switching Functions Controlled by Speaker Level Source - Power Supply Included Review

See more picture

RDL TX-PSD1 Paging Sound Detector Switching Functions Controlled by Speaker Level Source - Power Supply Included Feature

• Switching Functions Controlled by Speaker-Level Source.
• Input Accepts Amplified Constant Voltage Signals.
• Switch-Selectable Input 25 V, 70 V, 100 V.
• 25 Volt Input Also Accepts 8 Inputs up to 75 Watts.
• Transformer-Isolated Input.

The TXPSD1 is the ideal choice in many applications where switching needs to be controlled from a constantvoltage amplified audio source. The module will trigger on any program material, with paging sources being the most common. The TXPSD1 provides an open-collector SLAVE output to control other modules or equipment when a paging signal is detected. The amplified audio source is connected using a detachable terminal block. A front-panel switch is provided to select the source type 25 V, 70 V or 100 V. The 25 V setting may be used for an 8 ohm, 75 Watt maximum, amplified source. Input sensitivity is adjusted on a singleturn trimmer. In the clockwise position, the SENSITIVITY trigger threshold is 30 dB below the switchselected constant voltage. A red LED illuminates whenever the audio level exceeds the trigger threshold, facilitating the sensitivity adjustment. The module is triggered when the audio exceeds the threshold and it remains triggered for a defined time duration after the audio falls below the threshold. This DELAY is adjustable from 3 to 25 seconds using a front-panel trimmer. Adjustment is simplified by a green LED that remains illuminated while the module is triggered. The SLAVE terminal may be used as either an input or output control terminal. When the module is triggered, the SLAVE terminal is internally pulled to ground through an open collector. If the TXPSD1 SLAVE terminal is externally pulled to ground through a switch or the opencollector terminal of another RDL module, the relay will energize until the terminal is released. A blue POWER LED illuminates when the TXPSD1 is powered from an external 24 Vdc power supply. Use the TXPSD1 to control RDL modules or other equipment with ground activated control inputs that permit a 24 V pull up. - Power Supply Included

Check price now

Related Products

Customer Reviews

Oct 04, 2011 06:07:58